This pair of 3D Printable components are replacements for the metal brackets that support and hold the keyboard in place inside the chassis of a Commodore C64c.

If for some reason you are missing these brackets, you can order a replacement set. However, the more probable scenario is getting them for use with all new components. If you are buying a new C64c injection mold case, and then populating it with a freshly minted C64 Reloaded MK2 mainboard, besides needing a keyboard, you'll also need these internal brackets to properly mount that keyboard.

The left bracket is slightly larger. It is designed to slip under the front left corner of the mainboard. The mainboard is then screwed down to the bottom plate of the chassis through the hole in the bottom of the bracket. The right bracket is slightly smaller. It is designed to rest partially on top of joystick control port 1. And is screwed down on top of the mainboard. The tops of both brackets are then at the same height, and the correct angle to hold the top of the C64c keyboard. The tops of the brackets have two holes to screw the keyboard down onto the brackets. Although this is not strictly necessary.